wheel alignment Archives - Page 15 of 25 - Tyrepress

Wheel Alignment

Posts

Local MP Unveils Upgraded Crewe HiQ Centre

On January 10 the new facilities at HiQ Crewe were officially unveiled by local MP Edward Timpson. The fast fit network states that following its upgrade the Nantwich road centre is now able to boast a full provision of automotive services for motorists; facilities installed as part of a £100,000 investment by owners Andy Bucknall and Ken Lawton include an ATL class 4 MOT bay. The facility has been extended to accommodate two extra bays and motorists are now able to observe their vehicles’ treatment from a new customer lounge.

12th January 2011/by Tyrepress Editors

Pro-Align Suggests Alignment Checks following UK Snow

The snow that has recently delivered a prolonged period of tricky driving conditions in the UK has prompted wheel alignment machinery supplier Pro-Align to recommend checks for unknown damage to vehicles, potentially preventing higher running costs as tyres wear out prematurely and increased rolling resistance leading to higher fuel bills. “Although drivers may not notice any difference to the way their car feels after sliding into a kerb or other object, it’s important that they have their wheel alignment properly checked,” explains Paul Beaurain, managing director, Pro-Align.

7th January 2011/by Tyrepress Editors

Pro-Align Promoting Advanced Wheel Aligner Benefits in Pothole Season

Cold weather and snowy conditions do not just provide an opportunity for those selling winter tyres, Pro-Align has explained in a new statement. The effects of the climate last long after the snow has cleared, with the quality of road surfaces affected and providing motorists with the additional hazard of potholes. The UK’s pothole problem costs UK motorists around £2.8 billion each year according to the website potholes.co.uk, and Pro-Align says workshops without the latest four wheel alignment equipment may be missing out on a lucrative revenue opportunity. Driving over potholes is a major cause of wheel misalignment, which can reduce vehicle safety, increase fuel costs plus poor vehicle handling, causing distraction and concern for drivers. Unless workshops are equipped with the correct equipment, they will not be able to properly diagnose customer’s alignment problems and carry out the subsequent corrective work, claims the alignment specialist.

16th December 2010/by Tyrepress Editors

Match-mounting “Removes Unwanted Vibrations”: Pro-Align

Leading wheel alignment and wheel service equipment specialist Pro-Align is offering an advanced wheel balancer and tyre changer combination designed to solve the most difficult wheel vibration issues. “The majority of difficult vibration issues occur as a result of stiff spots within the tyre wall,” explains Paul Beaurain, managing director, Pro-Align. “These variations mean the tyre does not roll in a uniform manner and vibrations occur. However, as the stiff spots can only be detected under load, they cannot be identified on traditional wheel balancers. This means technicians rely on luck rather than correct diagnosis to solve issues.”

9th December 2010/by Tyrepress Editors

Supertracker Increases Value in Plimsoll Report

Wheel alignment equipment specialists Supertracker has been named one of the 62 UK companies within the UK Garage Equipment industry whose business has increased in value in a recently released Plimsoll Report, helping to boost the firm’s corporate trading image. The new valuation report and is based on the company's annual sales achievements during 2010. The report confirms that Supertracker is currently worth more than it was two years ago.

6th December 2010/by Tyrepress Editors

Pro-Align Maintains Service Through Winter with Seasonal Tyre Fitment

Leading wheel alignment specialist Pro-Align, has fitted its fleet of service and sales vehicles with winter tyres for the first time. The company says this should help maintain the high levels of support and assistance, whatever the weather this coming winter. By fitting winter tyres, Pro-Align says it aims to maintain its maximum 48-hour response times for any service breakdowns while ensuring its drivers remain safe on the road.

2nd December 2010/by Tyrepress Editors

Euro Car Parts Customer Praises 'Uplifting' Service

Leyton Service Centre, a successful garage for over 10 years recently decided to utilise the space in its garage more efficiently by installing a Class VII Tecalemit MoT bay and a Visualiner 3D Lite UK-Lift version 3D car Wheel Aligner from Euro Garage Solutions (EGS).

MOT testing stations in the UK now have the choice to opt for automatic test lanes (ATLs) to greatly enhance the testing procedure and reduce the labour burden, as only one person is required to complete the MOT test. Owner Bill Butt’s aim is to generate more business by working more efficiently. In addition by opting for a Class VII with its long platform and 5 and a half-metre lift the garage can now cater for the LCV market.

He also wanted the latest equipment to accurately measure wheel alignment and knew the John Bean 3D Alignment was the answer. With motorists becoming more aware that wheel alignment is an important check on a car he was looking for the solution to provide accurate results. Bill Butt wanted Leyton to move with the times and ensure they invest in the business future with quality equipment.

5th November 2010/by Tyrepress Editors

Snap-on Secures “Strong Sales Prospects” at Brityrex

Snap-on Equipment has reported a successful Brityrex International exhibition, held recently in Manchester. The garage equipment manufacturer showcased a comprehensive range, including tyre changers, wheel balancers and advanced full 3D alignment systems. Chris Behan, Snap-on Equipment’s general manager, said that the “on-stand equipment demonstrations proved to be highly effective, resulting in firm orders for the Hofmann Quadriga 1 fully automatic tyre changer, among many others.”

26th October 2010/by Tyrepress Editors

Pro-Align Debuts “Efficient” Hunter RX40 Alignment Lift Console

Workshops looking to increase service bay efficiency can now view the latest Hunter RX40 wheel alignment lift console, following installation of the equipment by Pro-Align’s at its Northamptonshire headquarters. The latest addition to Pro-Align’s range of advanced wheel alignment equipment features automatic tyre inflation and remote locking of turn plates and slip plates, saving technicians from walking up to five extra laps around the vehicle. Wheel alignment measurements readings can now be delivered in as little as two minutes, according to the garage equipment supplier, significantly increasing productivity and vehicle throughput.

13th October 2010/by Tyrepress Editors

Pro-Align Appoints Four to Sales Team on “Increased Demand”

Pro-Align has appointed three new field-based sales executives and one further addition to the company’s headquarters support team, stating that the roles were “created… in order to cope with an increased level of demand”. The company has long argued that its premium range of Hunter equipment provides garages and workshops with additional revenue opportunities due to factors such as the wider range of services they allow garages to offer and the increased speed with which they allow tasks such as four-wheel alignment to be completed. “Advanced wheel alignment systems are being increasingly recognised by the trade as an excellent source of revenue and new business,” explains Paul Beaurain, managing director, Pro-Align.

21st September 2010/by Tyrepress Editors

Kwik-Fit Pledges Additional Training Funds Following Watchdog Attack

Kwik-Fit has promised to direct an additional million pounds into staff training and double its mystery shopper programme after the BBC One show ‘Watchdog’ aired both its own experience with the fast fit chain and those of several unsatisfied customers. The September 16 edition of Watchdog outlined cases in which Kwik-Fit quoted for repair work that wasn’t required and performed vehicle inspections that didn’t deliver all that was promised.

17th September 2010/by Tyrepress Editors

Flagship Kettering HiQ Opens with Festivities following Makeover

HiQ’s fast fit centre in Kettering is encouraging motorists in the area to visit the flagship store during three days of free festivities to celebrate its £75,000 makeover. The centre on Telford Way Industrial Estate reports that it “is enjoying a huge upturn in fortunes” since it was radically rebranded and is now officially commemorating its new decor with a series of safety-orientated charity events on Thursday, 9 September to Saturday, 11 September. Fast fit technicians will provide free vehicle and wheel alignment health checks for every visitor, while the company will run a free prize draw to win a plasma TV, a Sat Nav system, a mountain bike and a barbecue. HiQ’s official charity Breast Cancer Care will also be represented throughout the days with its “pink ladies” as HiQ attempts to educate more families and women about the good work that the charity carries out.

8th September 2010/by Tyrepress Editors

‘Rolling Compensation’ Offered by New Pro-Align Sensor

A new addition to the range of conventional sensors offered by Pro-Align is intended to offer garages even quicker wheel alignment measurements. As Pro-Align explains, unlike many conventional sensors, its new DSP700 series sensors allow users to carry out ‘rolling compensation,’ making the measurement process much quicker and easier than the traditional jacking compensation method. The wheel alignment specialist estimates that measurement times can be reduced by as much as 60 per cent.

7th September 2010/by Tyrepress Editors

Pro-Align Joins TyreSafe

Wheel alignment equipment supplier Pro-Align has become the latest company to join TyreSafe. Pro-Align will support the industry’s safety awareness group’s ongoing campaigns which raise awareness about the dangers associated with defective and illegal tyres. The company will also provide specialist knowledge and advice relating to wheel alignment issues.

25th August 2010/by Tyrepress Editors

HiQ Easy Autocentres Franchise Invests in Pro-Align Machinery

HiQ franchise Easy Autocentres’ branches in Erdington and Kettering say they are benefitting from their investment in Pro-Align’s £30,000 wheel alignment systems. HiQ says there has been an increase in wheel alignment work of up to 50 per cent at each centre that now uses advanced Pro-Align machinery. Pro-Align says its systems help to improve motorists’ fuel economy, while also spotting defective and dangerous tyres at an early stage, thus reducing the potential of serious accidents.

18th August 2010/by Tyrepress Editors