retreading Archives - Page 64 of 105 - Tyrepress

Retreading

Posts

Pirelli Emphasises Truck Tyre Commitment

Pirelli Tyre has underlined its commitment to the truck tyre sector with the launch of a new tyre aimed at the regional sector of the European market. Called the R:01 Series, it has been developed by Pirelli's research centres to meet the requirements of professional operators in terms of mileage yield, reduced fuel consumption, retreading potential and respect for the environment.

Other Pirelli products in the truck sector include the H88 Amaranto and G88 series, developed for long distance transport and for construction vehicles respectively and the TS:01 series. These four products extend the Pirelli range designed for transport professionals in order to cover 80 per cent of the European market in those sectors with greater growth trends.

5th November 2009/by Tyrepress Editors

Snider Tire Opens MRT Retread Plant

North American retreader Snider Tire joined the Michelin Retreading Technologies (MRT) network of servicing dealers earlier this year. The company has now furthered its involvement with Michelin with the opening of an MRT truck tyre retreading facility in the town of Bluffton, Indiana. The new plant, which brings the total number of MRT facilities in the US to 81, will service two of Snider Tire’s ‘Tire and Retread Asset Control System’ (TRACS) locations: Bytheville, Arkansas, and Cambridge, Ohio. TRACS refers to Snider Tire’s cradle-to-grave tyre and retread solution for trucking fleet customers.

30th October 2009/by Tyrepress Editors

South American Tyre Industry Expo Taking Reservations

The ninth International Tyre Industry Expo in South America, PneuShow is set to take place in São Paulo, Brazil between 13 and 16 April, 2010 at the Expo Center Norte. The event will also include its second international tyre industry convention. Calling itself “the most important show for the tyre industry in South America”, PneuShow Recaufair’s exhibitors will include representatives from the tyre and wheel trades, including special application and industrial products; repair and retreading materials, machinery and moulds; and servicing and recycling equipment and tools. In 2008, the event had 100 exhibitors in a space of 4,500 sqm, with 10,800 visitors.

28th October 2009/by Tyrepress Editors

Michelin Q3 Figures Show Improvement

Michelin reports its decline in unit sales during the third quarter of 2009 and over the first nine months of the year is “in line with the decline in global tyre markets.” During the most recent quarter the manufacturer recorded a 14.0 per cent drop in unit sales, a figure that shows a lift in sales compared to the preceding months: in the first nine months of the year unit sales were 20.1 per cent down. The French tyre major generated net sales of 3.754 billion euros in the July to September quarter, a 10.9 per cent decrease on the corresponding three months in 2008. During the nine months to September 30, 2009 net sales amounted to 10.888 billion euros, a year-on-year decline of 12.5 per cent. Deutsche Bank analysts comment that third quarter sales were “slightly better than expected”; sales also beat the expected average of 3.727 billion euros gleaned from and a Reuters survey of six analysts. While volumes were as bad as Deutsche Bank’s analysts anticipated, Michelin’s four per cent price-mix for the quarter was a pleasant surprise. Price mix during the nine months was 7.6 per cent.

27th October 2009/by Tyrepress Editors

Goodyear Closing US Retread Product Plant

(Tire Review) Goodyear is closing its retread materials plant in Spartanburg, South Carolina, the company announced yesterday. The plant will be closed by the end of 2009, according to the announcement, putting some 90 employees out of work. Some of the employees, the company said, will be offered jobs at other Goodyear plants. The Spartanburg facility produces tread stock and other retread materials for Goodyear retreaders and company-owned retreading facilities. That production, said Goodyear, will be absorbed into other Goodyear facilities across the country.

22nd October 2009/by Tyrepress Editors

Vipal and Grumac Celebrate 5 Years of Partnership

In October of 2009 Vipal and Grumac completed five years of partnership. A UK-based company with more than 50 years of experience in the tyre and retreading business, Grumac has been the exclusive British repair material distributor Brazilian retreading material supplier Vipal since 2004.

partnership."

22nd October 2009/by Tyrepress Editors

India’s Sundaram Industries Joins TRIB

Membership numbers at TRIB, the US based Tire Retread & Repair Information Bureau, are nudging the 500 mark following the joining of India’s Sundaram Industries. The TVS Group company was founded in 1943, and TRIB describes the firm as being one of India’s oldest and largest retreading companies and retreading industry suppliers, a company with a long history of service throughout the country. The company’s products include tread rubber, retreading machinery and retreading accessories.

21st October 2009/by Tyrepress Editors

RÖSLER Agrees Supply Contract with Rio Tinto

The Rösler Group has signed a one-year supply contract with Rio Tinto to deliver Schelkmann Precured Retreaded (SPR) tyres to Rio Tinto’s iron ore mines in Western Australia. There is also said to be potential for Rösler to supply Rio Tinto’s coal operations in Queensland and New South Wales in the future. The contract includes a wide range of OTR sizes with a focus on the supply of Rio Tinto’s most important requirement, 40.00R57. According to the company, all tyres will be manufactured in Rösler’s new retreading facility in Perth (formerly owned by Rio Tinto).

15th October 2009/by Tyrepress Editors

Hankook Pulls New Truck Tyre Range Out of the Box

A new Hankook commercial vehicle radial known as the “e-cube” is being rolled out in European markets. And while at first glance the name may seem an unusual choice for a round product, Hankook Tire Europe explains the sense behind the new long-haul tyre’s given moniker: Three developmental directions have gone into the e-cube; namely energy and low rolling resistance, economy and high mileage, and environment (reduced hazardous materials and low rolling noise). These three “e” words are all equally important and thus can be represented by a three-dimensional geometric shape with equal length edges – in other words, a cube.

6th October 2009/by Tyrepress Editors

Chem-Trend Release Single Application Curing Envelope Treatment

International News, Product News, Retreading

Chem-Trend recently launched a single application curing envelope treatment aimed at the retreading industry. Mono-Lube 2006 is designed to increase curing envelope life, while providing “easy release from the cured tyre.” A typical life for a tyre retread curing envelope is 40 – 60 tyres, however according to the Chem-Trend Mono-Lube 2006 can extend life by between 33 to 100 per cent. In addition to providing good release from a cured tyre, it also provides good slip, enabling accurate positioning over the next, uncured tyre.

5th October 2009/by Tyrepress Editors

Marangoni Merges Retreading Businesses

As a response to market changes and the rapid evolution of its manufacturing and distribution arms, Marangoni has decided to merge by incorporation its Marangoni Spa and Marangoni Tread SpA operations into Marangoni Pneumatici SpA. This new company, which came into being on October 1, 2009, will serve as the parent company and will be officially known as Marangoni SpA. This merger, says Marangoni, is part of a medium-term strategic plan aimed at strengthening the group and placing a greater focus on its core retreading business.

2nd October 2009/by Tyrepress Editors

Tyres & Accessories September 2009

September's magazine covers the truck tyre market and developments in the battery sector. Also, look out for the latest edition of our Retreading Special supplement, which was published alongside the magazine.

25th September 2009/by Tyrepress Editors

Retreading Special September 2009

This edition of the bi-lingual Tyres & Accessories/Neue Reifenzeitung Retreading Special supplement contains articles on: The completion of Kraiburg's first large scale OTR tyre retreading project in Russia; Treads Direct's European marketing strategy, Bandvulc's move to wholesale Fulda new truck tyres and much more.

24th September 2009/by Tyrepress Editors

Kraiburg Survey Finds Partners “Very Pleased”

The majority of Kraiburg’s partners are more than satisfied with their retreading materials supplier, according to a survey conducted by the Austrian based company. The survey questioned 30 key account customers in the European market. Topics such as service, products, package value and suggestions or criticism were discussed in personal interviews. Marks were awarded from 1 for very good to 5 for unsatisfied. The average total mark was 1.63.

The Austrian company reportedly fared well in sales service, office and logistics departments (average mark 1.38) or availability and competence of the technical service (1.28). The same applies also to responses on the quality of the company’s cold and hot material (1.34 and 1.33 respectively).

24th September 2009/by Tyrepress Editors

Bandvulc Aims to Double Fulda’s UK Truck Tyre Share

Bandvulc Group, the Devon-based retreading and fleet servicing operation, is aiming to significantly increase Fulda brand truck tyre sales in the UK. Speaking at the company’s Fulda-brand launch event at Bruntingthorpe Proving Ground yesterday (17 September), Bandvulc managing director Patrick O’Connell explained that the company has already equalled the Goodyear Dunlop group brand’s 2008 UK sales volume. Starting as they mean to go on, the company reported that it has already transferred the Tesco fleet's doubledeck OE onto Fulda new tyres.

18th September 2009/by Tyrepress Editors